Urban Berlin

Urban Berlin


Urban Berlin has a wear layer of European Oak in a beautiful grey colour that is both stylish and sophisticated. It comes in a rustic grade which means the planks will contain a wide variety of knots, filled cracks and general feature. A light brushed surface effect gives the planks a subtle texture that follows the woodgrain pattern. This product is supplied already finished with a hardwearing matte lacquer which requires minimal maintenance. London will look the part in many interior styles, from classic to contemporary, modern and beyond.

Why choose Urban? People opt for Urban flooring where cost is critical but stylish and quality timber flooring is a must - think apartments, shop fitouts, high end rental properties and so much more! The Urban collection is 14mm thick, this is our thinnest engineered timber flooring product and has a shorter life expenctancy than our 15mm Smartfloor and our 21mm Ultra (hence the reason it is cheaper). The Urban wear layer (area above the tongue that can be resanded) is 3mm, meaning it can be sanded back 1-2 times over its lifetime. Due to its extra stable engineered construction it is likely to outlast a solid timber floor of the same dimensions.

  • Price POA
  • Availability Stocked product
  • Unit Size 2.086m2 pack
  • Code UP-BRP



CollectionUrban Product NameBerlin Product CodeUP-BRP Product TypeEngineered Plank


Suitable UsesResidential & Commercial Suitable ApplicationsFlooring, walls, ceilings & more Suitable SubstratesPlywood, particle board, concrete, existing timber - enquire for others Underfloor Heating CompatibilityHydronic type (enquire for others) Wet Area SuitabilityContact us for information


Dimensions14mm H x 190mm W, 1830mm L % of ShortsUp to 17% Composition3mm solid French Oak wear layer, Hevea core, Birch backing Re-sandsApprox 1-2 SpeciesFrench Oak (PEFC certified) Wood GradeRustic (see specsheet for info about this grade) StatusPre-finished Finish TypeBona matte lacquer (7 coats) SheenExtra matte (gloss level 8-12%) Surface TextureLightly brushed Edge StyleMicro-bevel 4 sides


Residential25 Years Commercial5 Years


PEFC CertifiedYes FormaldehydeNo added Formaldehyde Forté Replanting Initiative We re-plant what we use. Find out more


Joint ProfileValinge 5G Locking Installation MethodGlue down preferred (double stick for multi-level), can be floated


Supplied In2.086m2 packs Pack Dimensions90mm H x 207mm W x 1845mm Contents Breakdown 5 full lengths, 1 split length Weight18.4kg

Technical Specs

Reaction to Fire

ISO 9239-1 FlooringCritical Flux 5.0kw/m2 ISO 9705 Walls & CeilingsGroup 3

NZ Standards

Slip Resistance
AS/NZS 4586 - Dry Test
0.75 COF - Classification F (Moderate to very low)
Slip Resistance
AS/NZS 4586 - Wet Test
46 SRV - Classification W (Low)

Formaldehyde Emission

EN717-1E1 (0.066mg/m3)


Buyer Awareness

As this is a natural product you may experience the following:
Colour and Grain Variation
Wood is a natural product and will vary in colour and grain pattern from piece to piece. Please understand that this product will differ to what is represented in a display panel or sample. This variation is part of the natural look and should not be considered a fault
Batch Variation
There may be a variation in colour between batches - it is recommended to request a current batch sample if this is of concern to you. Please note: There will be colour variation between boards which cannot be represented from a small sample.
Fading/Darkening over Time
Natural wood products react to sunlight, resulting in fading or darkening over time. For example, a natural non-coloured Oak turns more golden from sunlight exposure. This is a naturally occuring process and is not considered a product fault. In general, lighter colours tend to darken while darker colours are more likely to fade.