Manor Atelier Classic 260 W x 21mm H (Lighter Brushed)

Manor Atelier Classic 260 W x 21mm H (Lighter Brushed)
Manor Atelier Classic 260 W x 21mm H (Lighter Brushed)
 

Description

Atelier Classic Light Brushed has a wear layer of European Oak in a rustic grade with brushing and handscraping on the surface, resulting in an aged and look with texture you can see and feel. What further enhances this texture is the product's incredible depth of colour, achieved through the use of a special aging stain which results in a very unique and distinctive look. This product is supplied pre-finished with a beautiful raw-look lacquer which provides a substantial level of scratch-resistance and durability. Atelier Classic is an extremely popular style due to its timeless look and ability to bring character and depth to any space.

This product has been coloured using a special aging stain, which reacts with the natural tannins in the timber to produce a unique and authentic aged look. This aging stain process typically results in a wide amount of colour variation between planks and from batch to batch, which is to be expected as part of unique character of this product.

Also Available: Matching stair nosings

  • Price POA
  • Availability Please enquire
  • Unit Size 2.288m2
  • Min Order Qty 1 pack
  • Code MACLB21
 

Details

Classification

Collection NameManor Product NameAtelier Classic 220x15mm (Lighter Brushed) Product CodeMACLB21 Product TypeEngineered Plank

Construction

Wear Layer4mm Solid European Oak No. of Resands2-3 times (approx) CoreCross-directional plywood

Dimensions

Width220mm Thickness15mm Length2.2m

Appearance

SpeciesEuropean Oak Wood GradeRustic Surface TextureMedium brushed Colour ProcessAging stain Edge StyleBevelled long edges

Finish

StatusPre-finished FinishMatte lacquer

Installation

Suitable UsesResidential & Commercial Suitable ApplicationsFlooring, walls, ceilings & more Suitable SubstratesPlywood, particle board, concrete JointsTongue & groove Installation MethodDirect stick Under Floor HeatingCompatible with most types Wet AreasContact us for information

Warranty

Residential25 YearsCommercial5 Years

Certification

PEFC CertifiedYes
 

Technical Specs

NZ Standards

Reaction to Fire
ISO 9239-1 Flooring
Critical Radiant Flux 2.2 kw/m
Reaction to Fire
ISO 9705 - Walls & Ceilings
Group 3 (Fire shield can be applied to meet Group 1-S)
Slip Resistance
AS/NZS 4586 - Dry Test
0.85 - Classification F (Moderate to very low risk)
Slip Resistance
AS/NZS 4586 - Wet Test
42 BPN - Classification X (Moderate risk)

European & Other Ratings

Reaction To Fire
EN 13501-1 : 2007
CFL - s1
Formaldehyde Emission
EN717-1
E1
 

Downloads

Buyer Awareness

As this is a natural product you may experience the following:
Colour and Grain Variation
Wood is a natural product and will vary in colour and grain pattern from piece to piece. Please understand that this product will differ to what is represented in a display panel or sample. This variation is part of the natural look and should not be considered a fault
Batch Variation
There may be a variation in colour between batches - it is recommended to request a current batch sample if this is of concern to you. Please note: There will be colour variation between boards which cannot be represented from a small sample.
Fading/Darkening over Time
Natural wood products react to sunlight, resulting in fading or darkening over time. For example, a natural non-coloured Oak turns more golden from sunlight exposure. This is a naturally occuring process and is not considered a product fault. In general, lighter colours tend to darken while darker colours are more likely to fade.
 
 

Request Sample

Samples are FREE including shipping to all New Zealand addresses. For shipping to Australia and other locations please enquire.

Standard samples are 200mm long x the width of the plank. If you require larger samples please add this to the 'special instructions' box at the checkout.

Add to Sample Cart
 

Request Quote

Manor Atelier Classic 260 W x 21mm H (Lighter Brushed)
PLEASE NOTE: When calculating square meterage required you will need to allow extra for wastage. General rule of thumb is to allow 10% extra for square rooms, 15%+ extra for rooms with curved or angled walls and 15%+ extra for stairs.
 
 
 
 

Specify

 
 
 
 


Back...