Manor Hillsdale Herringbone 15mm H

Manor Hillsdale Herringbone 15mm H
Manor Hillsdale Herringbone 15mm H


Our Manor Herringbone collection has a large format pattern, ideal for medium to larger spaces as it is not too busy. It can be used for flooring, feature walls and more.

Herringbone Hillsdale has a wear layer of PEFC Certified genuine French Oak in a feature grade with light brushing and handscraping on the surface, resulting in an elegant aged look with texture you can see and feel. What further enhances this texture is the product's incredible depth of colour, achieved through the use of a special aging stain which results in a very unique and distinctive look. This product is supplied pre-finished with a beautiful raw-look lacquer which provides a substantial level of scratch-resistance and durability. Herringbone Hillsdale will look stunning in both modern and old-style interiors, bringing lightness and character any space.

This product has been coloured using a special aging stain, which reacts with the natural tannins in the timber to produce a unique and authentic aged look. This aging stain process typically results in a wide amount of colour variation between planks and from batch to batch, which is to be expected as part of unique character of this product.

Matching planks and stair nosings available

  • Price POA
  • Availability Custom order
  • Unit Size 0.576m2 pack
  • Min Order Qty 80m2
  • Code MHH15
  • Lead Time 16-20 weeks



Collection NameManor Product NameHerringbone Hillsdale 120x600mm Product CodeMHH15 Product TypeEngineered Parquet


Wear Layer4mm Solid French Oak No. of Resands2-3 times (approx) BackingCross-directional plywood


Width120mm Thickness15mm Length600m


SpeciesFrench Oak Wood GradeFeature Surface TextureLightly Brushed & Handscraped Colour ProcessAging stain Edge StyleBevelled 4 sides


StatusPre-finished FinishMatte lacquer


Suitable UsesResidential & Commercial Suitable ApplicationsFlooring, walls, ceilings & more Suitable SubstratesPlywood, particle board, concrete JointsTongue & groove Installation MethodDirect stick Under Floor HeatingCompatible with most types Wet AreasContact us for information


Residential25 Years Commercial5 Years


PEFC CertifiedYes

Technical Specs

NZ Standards

Reaction to Fire
ISO 9239-1 Flooring
Critical Radiant Flux 2.2 kw/m
Reaction to Fire
ISO 9705 - Walls & Ceilings
Group 3 (Fire shield can be applied to meet Group 1-S)
Slip Resistance
AS/NZS 4586 - Dry Test
0.85 - Classification F (Moderate to very low risk)
Slip Resistance
AS/NZS 4586 - Wet Test
42 BPN - Classification X (Moderate risk)

European & Other Ratings

Reaction To Fire
EN 13501-1 : 2007
CFL - s1
Formaldehyde Emission


Buyer Awareness

As this is a natural product you may experience the following:
Colour and Grain Variation
Wood is a natural product and will vary in colour and grain pattern from piece to piece. Please understand that this product will differ to what is represented in a display panel or sample. This variation is part of the natural look and should not be considered a fault
Batch Variation
There may be a variation in colour between batches - it is recommended to request a current batch sample if this is of concern to you. Please note: There will be colour variation between boards which cannot be represented from a small sample.
Fading/Darkening over Time
Natural wood products react to sunlight, resulting in fading or darkening over time. For example, a natural non-coloured Oak turns more golden from sunlight exposure. This is a naturally occuring process and is not considered a product fault. In general, lighter colours tend to darken while darker colours are more likely to fade.
Manor Hillsdale Herringbone 15mm H
PLEASE NOTE: When calculating square meterage required you will need to allow extra for wastage. Herringbone and Chevron patterns accumulate more wastage than standard planks - is best to allow at least 15% extra for square surfaces and even more for surfaces with angles or curved walls. We do not recommend installing herringbone on stairs unless you want to drive your installer crazy! Instead we suggest using regular planks in the same colour.