Urban Plank: Paris

Urban Plank: Paris
 

Description

Paris has a wear layer of European Oak in a gorgeous beige-grey colour which is both neutral and timeless. It comes in a rustic grade which means the planks will contain a wide variety of knots, filled cracks and general feature. A light brushed surface effect gives the planks a subtle texture that follows the woodgrain pattern.

This product is supplied already finished with a hardwearing matte lacquer which requires minimal maintenance. Paris will look the part in almost any interior style, from classic to contemporary, modern and beyond.

Why choose Urban Plank? People opt for Urban Plank where cost is critical but stylish and quality timber flooring is a must - think apartments, shop fitouts, high end rental properties and so much more! The Urban Plank collection is 14mm thick, this is our thinnest engineered timber flooring product and has a shorter life expenctancy than our 15mm Smartfloor and our 21mm Ultra (hence the reason it is cheaper). The Urban Plank wear layer (area above the tongue that can be resanded) is 3mm, meaning it can be sanded back 1-2 times over its lifetime. Due to its extra stable engineered construction it is likely to outlast a solid timber floor of the same dimensions.

  • Price POA
  • Availability While stocks last
  • Unit Size 2.888m2 pack
  • Min Order Qty 1 pack
  • Code UPPAR190
 

Details

Classification

Collection NameUrban Plank Product NameParis Product CodeUPPAR190 Product TypeEngineered Plank

Construction

Wear Layer3mm Solid European Oak Core & BackingPine No. of Resands1-2 times

Dimensions

Width190mm Thickness14mm Length1.9m

Appearance

SpeciesEuropean Oak Wood GradeRustic Surface TextureLightly brushed Edge StyleMicro bevelled 4 sides

Finish

StatusPre-finished FinishMatte lacquer

Installation

Suitable ApplicationsResidential & Commercial Suitable UsesFlooring, walls, ceilings & more Suitable SubstratesTimber or concrete Joint ProfileUniclic locking joint Installation MethodGlue down (preferred) or floating Under Floor HeatingCompatible with hydronic type (enquire for others) Wet AreasContact us for information

Warranty

Residential25 Years Commercial5 Years

Certification

PEFC CertificationAvailable on request
 

Technical Specs

NZ Standards

Reaction to Fire
ISO 9239-1 Flooring
Critical Radiant Flux 5.7kw/m2
Reaction to Fire
ISO 9705 - Walls & Ceilings
Group 3 (FireShield can be applied to meet Group 1-S)
Slip Resistance
AS/NZS 4586 - Dry Test
Classification F, Mean COF 0.75, Moderate to Very Low risk
Slip Resistance
AS/NZS 4586 - Wet Test
Classification X, Pendulum Mean 41 BPN, Moderate risk

European & Other Ratings

Reaction To Fire
EN 13501-1 : 2007
CFL - s1
Formaldehyde Emission
EN717-1
E1
 

Downloads

Buyer Awareness

As this is a natural product you may experience the following:
Colour and Grain Variation
Wood is a natural product and will vary in colour and grain pattern from piece to piece. Please understand that this product will differ to what is represented in a display panel or sample. This variation is part of the natural look and should not be considered a fault
Batch Variation
There may be a variation in colour between batches - it is recommended to request a current batch sample if this is of concern to you. Please note: There will be colour variation between boards which cannot be represented from a small sample.
Fading/Darkening over Time
Natural wood products react to sunlight, resulting in fading or darkening over time. For example, a natural non-coloured Oak turns more golden from sunlight exposure. This is a naturally occuring process and is not considered a product fault. In general, lighter colours tend to darken while darker colours are more likely to fade.
 
 

Request Sample

Samples are FREE including shipping to all New Zealand addresses. For shipping to Australia and other locations please enquire.

Standard samples are 200mm long x the width of the board. If you require larger samples please add this to the 'special instructions' box at the checkout.

Add to Sample Cart
 

Request Quote

Urban Plank: Paris
PLEASE NOTE: When calculating square meterage required you will need to allow extra for wastage. General rule of thumb is to allow 10% extra for square rooms, 15%+ extra for rooms with curved or angled walls and 15%+ extra for stairs.
 
 
 
 

Specify

 
 
 
 


Back...