Ultra: Slate Grey Oak

Ultra: Slate Grey Oak

Ultra: Slate Grey Oak
Ultra: Slate Grey Oak
 

Description

End of line product. 9.978m2 remaining as of 23/04/2019 - special deals available!

Limited stocks remaining - special deals available!

Prefinished Ultra Slate Grey Oak has a wear layer of genuine European Oak in a gorgeous blue-grey colour. It comes in a feature grade which means the boards will contain knots and general feature, adding a feeling of character to your room. This product is supplied already finished and has a brushed effect on the surface which accentuates the grain. This flooring will suit most interiors!

  • 189mm wide boards
  • 21mm thickness - Can be direct stuck, floated or laid on joists
  • 2.2m lengths - Up to 25% shorts
  • 6mm real wood wear layer - Has the same sanding life as a traditional solid wood floor
  • Base layer of cross-directional hardwood ply - Much more stable than solid wood flooring and less likely to experience shrinkage or cupping
  • Pale blue-grey wash colour
  • Brushed finish - Accentuates the natural wood grain pattern
  • Bevels on long edges - Click here to find out more
  • Comes prefinished - Finished with a very hardwearing acrylic lacquer, requires no further finishing after installation
  • Tongue & groove locking system - Quick and easy to install
  • 25 year structural warranty

  • Product code PUSGO189
    Sold in 1.663m2 boxes
    CLEARANCE PRODUCT, SPECIAL PRICES AVAILABLE – PLEASE ENQUIRE
    Current stock level: 38.249m2 / 23 packs

       
       

      Request Sample

      Samples are FREE including shipping to all New Zealand addresses. For shipping to Australia and other locations please enquire.

      Standard samples are 200mm long x the width of the board. If you require larger samples please add this to the 'special instructions' box at the checkout.

      Add to Sample Cart
       

      Request Quote

      Ultra: Slate Grey Oak
      PLEASE NOTE: When calculating square meterage required you will need to allow extra for wastage. General rule of thumb is to allow 10% extra for square rooms, 15%+ extra for rooms with curved or angled walls and 15%+ extra for stairs.
       
       
       
       

      Specify

       
       
       
       


      Back...