Herringbone Heathered Grey - 120 x 600 x 15mm
Photo Gallery
Description
Our Manor Herringbone collection has a large format pattern, ideal for medium to larger spaces as it is not too busy. It can be used for flooring, feature walls and more.
Herringbone Heathered Grey has a wear layer of PEFC Certified genuine French Oak in a feature grade with light brushing and handscraping on the surface, resulting in an elegant aged look with texture you can see and feel. What further enhances this texture is the product's incredible depth of colour, achieved through the use of a special aging stain which results in a very unique and distinctive look. This product is supplied pre-finished with a beautiful raw-look lacquer which provides a substantial level of scratch-resistance and durability. Herringbone Heathered Grey will look stunning in both contemporary and classic interiors, bringing depth and coziness to the space.
This product has been coloured using a special aging stain, which reacts with the natural tannins in the timber to produce a unique and authentic aged look. This aging stain process typically results in a wide amount of colour variation between planks and from batch to batch, which is to be expected as part of unique character of this product.
Matching planks and stair nosings available
- Price POA
- Availability Indent Item
- Unit Size 0.576m2 pack
- Min Order Qty 80m2
- Code MHHG15
- Lead Time 16-20 weeks
Details
Classification
Collection NameManor} Product NameHerringbone Heathered Grey 120x600mm} Product CodeMHHG15 Product TypeEngineered ParquetConstruction
Wear Layer4mm Solid French Oak No. of Resands2-3 times (approx) BackingCross-directional plywoodDimensions
Width120mm Thickness15mm Length600mAppearance
SpeciesFrench Oak Wood GradeFeature Surface TextureLightly Brushed & Handscraped Colour ProcessAging stain Edge StyleBevelled 4 sidesFinish
StatusPre-finished FinishMatte lacquerInstallation
Suitable UsesResidential & Commercial Suitable ApplicationsFlooring, walls, ceilings & more Suitable SubstratesPlywood, particle board, concrete JointsTongue & groove Installation MethodDirect stick Under Floor HeatingCompatible with most types Wet AreasContact us for informationWarranty
Residential25 Years Commercial5 YearsCertification
PEFC CertifiedYesTechnical Specs
NZ Standards
Reaction to FireISO 9239-1 FlooringCritical Radiant Flux 2.2 kw/m² Reaction to Fire
ISO 9705 - Walls & CeilingsGroup 3 (Fire shield can be applied to meet Group 1-S) Slip Resistance
AS/NZS 4586 - Dry Test0.85 - Classification F (Moderate to very low risk) Slip Resistance
AS/NZS 4586 - Wet Test42 BPN - Classification X (Moderate risk)
European & Other Ratings
Reaction To FireEN 13501-1 : 2007CFL - s1 Formaldehyde Emission
EN717-1E1
Downloads
Buyer Awareness
Colour and Grain Variation
Wood is a natural product and will vary in colour and grain pattern from piece to piece. Please understand that this product will differ to what is represented in a display panel or sample. This variation is part of the natural look and should not be considered a fault
Batch Variation
There may be a variation in colour between batches - it is recommended to request a current batch sample if this is of concern to you. Please note: There will be colour variation between boards which cannot be represented from a small sample.
Fading/Darkening over Time
Natural wood products react to sunlight, resulting in fading or darkening over time. For example, a natural non-coloured Oak turns more golden from sunlight exposure. This is a naturally occuring process and is not considered a product fault. In general, lighter colours tend to darken while darker colours are more likely to fade.
Request Sample
Samples are FREE including shipping to all New Zealand addresses. For shipping to Australia and other locations please enquire.
When ordering Chevron or Herringbone samples you will receive one full length piece. If you require more samples please add this to the 'special instructions' box at the checkout.
Add to Sample CartRequest Quote
Specify
Complementary Products
Back...