Millboard vs Real Wood Decking

Millboard vs Real Wood Decking

More Cost effective long-term

The initial cost of Millboard decking is more expensive than real timber decking. However, if you consider that Millboard requires no staining, sanding or maintenance (aside from cleaning) over its lifetime, and can typically last up to 35-40 years (subject to environment), whereas timber typically lasts 10-15 years - it is clear that Millboard works out cheaper in the long run.

Quicker to install

The subframe material costs for Millboard are comparable to traditional wood decking. However Millboard requires no pre-drilling and all the boards are manufactured perfectly straight (no warping), which cuts down the installation time by about 30%. As a result, a Millboard deck will usually work out cheaper to install than a real timber deck.

Longer Lifespan

Millboard decking boards can typically last up to 35-40 years (subject to environment), whereas timber typically lasts 10-15 years. The life cycle cost of Millboard is considerably less than that of wood decking.

Virtually Maintenance-free

Real timber decking is recommended to be re-stained up to twice a year, with with the cost of re-staining a timber deck sitting at $20-30/m2. In contrast to this, Millboard decking needs no paints, varnishes, sealers and stains to maintain its good looks.

Realistic Wood look

Millboard decking is hand-moulded from real wood, resulting in an authentic wood-look finish – you’d hardly know it wasn’t wood without close inspection.

Uniform product

Millboard is a much superior quality material to timber decking and it is uniform, whereas timber decking may be warped, contains knots and is inconsistent in density. It’s the perfect alternative decking product.

Dimensional Stability

Most real timber decking is not very stable and has a tendency to expand and contract. Millboard decking is made from a unique resin mineral board that has a very low expansion and contraction rate at less than 0.01% - similar to concrete. Millboard is non warping, twisting or buckling, and will not splinter.

Resistant to fading and colour change

Real timber decking can fade and change colour over time. Millboard is produced from UV stable materials and is highly resistant to fading.

Highly slip-resistant

Millboard's ribberized Lastane® coating gives it fantastic anti-slip performance, far better even than natural timber.

Inherent microbiological properties

Millboard decking contains nothing to assist in the growth of algae. Materials like wood or plastic which are protein based and are like food to algae. It is non porous so that dirt, drinks, food fats etc. won’t be absorbed into the board.

Won't rot or break down from insects

Unlike real timber decking, Millboard decking is made from a wood-free material that doesn't rot and won't be broken down by insect activity.

Hidden Fixings

Most real timber decking has unsightly fixings which require pre-drilling. With Millboard, the special Durafix® screws are simply screwed straight into the face and Millboard's unique Lastane™ surface seals itself back over the heads, leaving virtually no evidence - no pre-drilling required!

Environmentally Friendly

Millboard has been tested and its base material properties are excellent - its Ozone Depletion Potential (ODP) rating is zero, and Global Warming Potential (GWP) rating is also zero. The Millboard Company Ltd itself is an ISO 14001 certified company, complying with international environmental management practices.

Date Added: Tuesday, 26th June 2018
 


 


Back...